Tractor Wood Chipper Double Horizontal Rollers 40 - 100HP Tractor
1. The BX72R wood chipper with shear bolt PTO shaft for 40 - 100 HP
2. It has double horizontal feed rollers, the height of upper
roller can be adjusted.
3. The chipper we can powder coated green, red, black or any colour
as your request.
The Fred BX72R chipper is used for grinding branches, tree trunks
up to 17cm in diameter.
The chipper with a three-point suspension system is designed for
cooperation with a farm tractor with a minimum power of 50 km.
It has a charging hopper equipped with a hydraulic mechanism of
self-feeding material, consisting of two gear shafts, pulling the
material into the cutting chamber of the chipper, driven by
high-power hydraulic motors.
Hydraulic system contains oil tank, hydraulic pump, hoses, oil
control valve and control handle.
The discharge funnel can be turned by 360 degrees with an
adjustable throwing angle.
The massive chipping disc of the chipper is equipped with 4 cutting
knives sharpened on both sides + one against the knife mounted in
the chipper base.
BX72R wood chipper is equipped with a massive chipping disc with a
diameter of 740 mm and the weight of the disc is 95 kgs.
As a result, in contrast to drum and cylindrical formers - disc
chippers do not burden the engine to a large extent, because the
cutting resistance is overcome by the rotational force of the
The chipper also has a latch blocking the disc, which facilitates
the replacement of cutting knives.
The drive from the tractor to the chipper is transferred by means
of a transmission shaft equipped with a safety pin, which is cut
when the machine is too heavy and disconnects the direct drive.
The feed roller control bar has four
The feed hopper can be fold. It is possible to quickly and easily
change the dimensions, which will save space during transport.